Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Manual page 18

J
VI
Section Drive Bay for Upgrade from 4x2.5" to 8x2.5" HD Basic Unit
From Base Unit S26361-K1455-V101
Drive Bay with up to 4x 2.5" HDDs
plus one bay for DVD
VII
Section Modular Raid 0/1, Raid5 for 4x / 8x 2.5" SAS or SATA HD`s. On-board Controller for 4x 2.5" SATA or SAS HD`s
On board SATA Controller with 3 Gb/s and up to 4x 2.5" SATA HDDs (no additional controller required)
For all other HDD configurations a modular RAID-controllers is required
Following optional onboard SAS RAID can be selected for 4x2.5" base unit V101
S26361-F3674-E1
SAS enabling key for onboard ports
LSI - Patsburg B
no Cache, no BBU
RAID 0, 1 & 10
SAS 1.0 (3Gb/s)
4 internal ports for SAS HD
PCIe x4
no PCI slot required
max. 1x per system
For 8x2.5" V201 base unit one of the following modular RAID-controllers is required (optional for 4x2.5" base unit)
Modular Raid 0/1 controller with IME support for SAS/SATA
This RAID controller supports 8 HDDs on the 4 + 4 internal SAS ports
S26361-F3554-E8
RAID Ctrl SAS 6G 8port internal
only for
Based on chip LSISAS2008
V101
LSI MegaRAID
no Cache, no BBU
RAID 0, 1 & 10
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3669-L660
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 RAID Ctrl S26361-F3669-xx
K
S26361-F3317-L700
8x 2.5" HDD Upgrade Option
Upgrade to up to 8x 2.5" bays
only for
V101
Modular Raid 5 controller for SAS/SATA
RAID levels 0, 1, 10, 5, 50, 6 and 60
are supported.
This RAID controller supports 8 HDDs on the
4 + 4 internal SAS ports
S26361-F3554-E512
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2108
LSI MegaRAID
512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional BBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3257-E216
Cache Battery Backup Unit
max. 1x per Controller
Lose delivery options
S26361-F3669-L100
TFM Module for FBU option
max. 1x per Controller
S26361-F3669-L110
Flash Backup Unit
with 17cm, 47cm, 62cm cable set
max. 1x per Controller
BBU / FBU max. 1x per system possible
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX200 S8
to Base Unit S26361-K1455-V201
Drive Bay with up to 8x 2.5" HDDs
8 HDD Ports are connected to a RAID Ctrl.
The FBU is an option for the controller
which can be used once per controller.
If the FBU option has been choosen, the
TFM Module is needed once per FBU.
S26361-F3669-E4
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2208
LSI MegaRAID
1GB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional FBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe 3.0 x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3669-E660
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 Controller
S26361-F3669-E100
TFM Module for FBU option
(flash and FBU control logic)
max. 1x per Controller
S26361-F3669-E125
Flash Backup Unit
with 17cm cable set
max. 1x per Controller
Status 30-01-2014
only Gen2 for RX200 S8
18 of 28