Download Print this page

EverFocus EDSR400h Quick Reference page 3

Digital single channel recorder
Hide thumbs Also See for EDSR400h:

Advertisement

6. Enter the Gateway Address assigned to your network. This can be achieved using the
Arrow buttons.
7. Exit the Menu by pressing the Menu button and Reboot the EDSR400 by powering it
down and back up.
(NOTE: Please be sure that ports 80, 1111, 2222, 3333, 4444, 6666 are open.)
Dynamic IP
Often times Dynamic IP addresses can cause conflicts when trying to connect to DVR(s) on a
high speed internet connection. With new router technology (DDNS), it allows you to
overcome this problem. DDNS lets you assign a fixed host and domain name to a dynamic
Internet IP address. It is useful when you are hosting your own DVR, website, FTP server, or
other server behind the Router. Before using this feature, you need to sign up for DDNS
service at
www.dyndns.org
DLINK DI624 or any router that offers DDNS.
Archiving (still image)
1. Place a Compact Flash Card into the Compact Flash Reader/Writer located next to the
Hard Drive Bay on the EDSR900.
2. Playback (full screen) the video that you want to archive.
3. Once you have chosen what to archive. Press the Pause button (use JOG wheel to select
camera and frame) followed by the Copy button.
4. When finished the DVR will notify you with a successful message button.
5. Eject the Compact Flash Card from the Reader/Writer.
Archiving (MOV file)
1. Place a Compact Flash Card into the Compact Flash Reader/Writer located next to the
Hard Drive Bay on the EDSR100.
2. Search and Playback (full screen) the video that you want archive.
3. Once you have chosen what to archive. Press the COPY button (use JOG wheel to select
camera and frame).
4. Press COPY to start the copy.
5. Press Stop to close the copy, wait 30 sec.
6. Then eject the Compact Flash Card from the Reader/Writer.
Compatible Flash Cards
1. SanDisk
2. Kingston
Motion Recording
The recommended motion set up for maximum video storage (HDD).
1. Press the menu button and use the JOG Dial to traverse through until Normal Record
Menu.
2. Set the Speed at a lower recording speed (IPS) between 0.1-5 IPS, refer to Appendix A &
B.
3. Now traverse (w/ JOG Dial) through until Motion Record Menu.
4. Set the Speed at a higher recording speed (IPS) between 10-60 IPS, refer to Appendix A
& B.
or www.tzo.com. (Preferred routers: Linksys BEFSR41 V3 or

Advertisement

loading