Step 3: Install Expansion Cards - Gigabyte GA-8IRXP User Manual

Step 3: Install expansion cards

1. Read t he related expansion card's instruction document before install the expansion card into
the comput er.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card f irmly into expansion slot in motherboard.
4. Be sure the met al contact s on the card are indeed seat ed in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install relat ed driver from t he operating system.
AGP Card
Issues To Beware Of When Installing CNR
Please use standard CNR card like the one in order to avoid mechanical problem.
Standard CNR Card
Please carefully pull out the small white-
drawable bar at the end of the A GP slot
when you try to install/ Uninst all the AGP
card. Please align the AGP card to the
onboard AGP slot and press firmly down on
the slot .Make sure your AGP card is locked
by t he small whit e- drawable bar.
- 11 - Hardware Installation Process