M, N) USB2 / USB3 / USB4 (USB3 & 4 connectors in orange are for USB 2.0)
1
T) F_AUDIO (F_AUDIO Connector)
There are two types of Front Audio connector, please refer to the tables below before you install.
Type 1
1
Ø Be careful with the polarity of the front
panel USB connector. Check the pin
assignment while you connect the f ront
panel USB cable. P lease contact your
nearest dealer f or optional f ront panel
USB cable.
Type 2
Ø If you want to use type-1 Front Audio
connect or, you must remove 11-12,13-14
Jumper. If you want to use type-2 Front
Audio connect or, you must remove 3-4 ,5-6
Jumper. In order to ut ilize the front audio
header, your chassis must have front audio
connector. A lso please make sure the pin
assigment on the cable is the same as the
pin assigment on t he MB header. To find out
1
if the chassis you are buying support front
audio connector, please contact your dealer.
- 17 -
Hardware Installation Process