Connecting To A Network In Infrastructure Mode; Scanning Available Access Points - Creative Network Blaster CW2230 User Manual

Configuring Settings
Connecting to
a network in
Infrastructure
mode
Scanning available
access points
You can connect to a network in Infrastructure or Ad-Hoc mode. For Ad-Hoc mode
connection steps, see "Connecting to a network in Ad-Hoc mode" on page 4-5.
Infrastructure mode connection steps are found below.
1. Click the Network Blaster
Wireless USB Adapter Utility
icon on the taskbar.
2. On the left pane, click Site
Survey (Figure 4-1).
3. Click the Refresh button.
A list of available access points
and Ad-hoc stations appears.
4. Under Available Networks,
select the network to connect to,
and then click the Connect
button.
Figure 4-1
Configuring Settings 4-1