Download Print this page
Creative CB2470 User Manual
Creative CB2470 User Manual

Creative CB2470 User Manual

Bluetooth wireless audio adapters

Advertisement

Quick Links

CB2470
Bluetooth Wireless

Audio Adapter

User's Guide
i

Advertisement

loading

Summary of Contents for Creative CB2470

  • Page 1: Audio Adapter

    CB2470 Bluetooth Wireless Audio Adapter User’s Guide...
  • Page 2: Fcc Caution

    FCC Caution 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 3: End Product Labeling

    End Product Labeling This transmitter module is authorized only for use in device where antenna may be installed such that 20 cm may be maintained between antenna and users (for example access points, routers, wireless ADSL and similar equipment). The final end product must be labeled in a area with the following: “...
  • Page 4 MP3 players, mobile phones and PCs. The transmittion distance can be up to 30 meters. With CB2470, you can use MP3 players, mobile phones and PCs wirelessly through Bluetooth connection. The CB2470 is compatible with above devices wihout drivers needed.
  • Page 5 >>> 1.2 How CB2470 Works Step 1: Press and hold the Power/Pair button for 3-secs irregardless of whether unit is in Stand-By mode or Pair and Connect mode. The Bicolor LED will then alternate between blue and green. Step 2: When paired successfully, the LED will convert to blue colour and will start to blink once every 5-sec.
  • Page 6: Led Indicator

    >>> 1.3 Product View LED Indicator Power/Pair Button Turning on the Press and hold the Power/Pair button for five seconds. LED audio adapter will light up for 0.3 sec. Thereafter the audio adapter will auto- detect and connect to the paired devices. Turning off the Press and hold the Power/Pair button for five seconds.
  • Page 7 >>> 1.4 Specifications 1.4.1 General Power Source 1 x AAA Battery Storage Temperature 0°C - 70°C Operating 5°C - 55°C Temperature Firmware Upgrade To be upgraded at Factory Level via contact points located at Batter Chamber. Low Battery Green LED will blink twice rapidly in Indicator succession for every 5 sec interval.