Replacing Headlamp Bulbs (Sealed Beam); Replacing Park/Turn/Sidemarker Bulbs (Sealed Beam) - Ford F-350 Owner's Manual

Lights
4. Remove the bulb assembly, (1)
sidemarker or (2) park/turn by
turning it counterclockwise and
pulling it straight out.
5. Pull the old bulb out from the
socket.
Install the new bulb(s) in reverse order.

Replacing headlamp bulbs (sealed beam)

1. Make sure that the headlamp control is in the off position and open
the hood.
2. Remove the three screws and one
bolt from the top and bottom of the
park lamp/bezel assembly.
3. Remove the four screws and the
headlamp retaining ring from
headlamp.
4. Disconnect the electrical
connector from the headlamp.
Install the new bulb(s) in reverse order.

Replacing park/turn/sidemarker bulbs (sealed beam)

1. Make sure that the headlamp control is in the off position and open
the hood.
94
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)