Ford F-250 Owner's Manual page 142

Locks and Security
Programming memory feature to transmitter
To activate this feature:
1. Move the driver seat, power mirrors, and adjustable pedals to the
desired positions using the associated controls.
2. Press and hold control button 1
for five seconds. A tone will be
heard after two seconds confirming
memory position has been set.
Continue to hold until a second tone
is heard after five seconds.
3. Within three seconds press
4. Wait 10 seconds, then press
5. Repeat this procedure for
memory 2 and another transmitter if
desired.
Deprogramming memory feature from transmitter
To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's door for five
seconds. A tone will be heard after 1
is done, continue to hold until a second tone is heard after five seconds.
2. Within three seconds press
3. Repeat this procedure for another transmitter if desired.
Replacing the battery
The integrated keyhead transmitter (IKT) or intelligent access key (IA
key) uses one coin type three-volt lithium battery CR2032 or equivalent.
142
2011 F-250/350/450/550 (f23)
Owners Guide, 3rd Printing
USA (fus)
.
.
1 ⁄ seconds when the memory store
2
.