Remote Control; Keys - Ford 2013 Flex Owner's Manual

60 Keys and Remote Control
Intelligent Access (If Equipped)
The system uses a radio frequency signal to communicate with your
vehicle and authorize your vehicle to unlock when commanded (either
by touching the inside of the driver door or front passenger exterior door
handle, by activating the exterior power liftgate button, or a button on
the transmitter itself). If excessive radio frequency interface is present in
the area, or if the transmitter battery is low, it may be necessary to
mechanically unlock your door. The mechanical key blade in your
intelligent access key can be used to open the driver's door in this
situation. Refer to Remote Control in this chapter for more information
on the location and use of the mechanical key blade.

REMOTE CONTROL

Integrated Keyhead Transmitters (IKTs) (If Equipped)
Intelligent Access Key (If Equipped)
2013 Flex (471)
Owners Guide gf, 2nd Printing
USA (fus)
Your vehicle may be equipped with
two integrated keyhead transmitters.
The key blade is used to start the
vehicle and unlock or lock the
driver's door from outside the
vehicle. The transmitter portion
functions as the remote control.
Note: Your vehicle's keys were
issued with a security label that
provides important vehicle key cut
information. Keep the label in a safe
place for future reference.
Your vehicle may be equipped with
two intelligent access keys which
operate the power locks and the
remote start system. The key must
be in the vehicle to activate the
push button start system.