Ignition Switch; Keyless Starting - Ford 2013 Flex Owner's Manual

Starting and Stopping the Engine
IGNITION SWITCH (IF EQUIPPED)
Note: Do not store the key in the ignition after the vehicle is turned off
and you have left the vehicle. This could cause a drain on the battery.
Note: In order to switch off the engine while the vehicle is in motion,
shift to N (Neutral) and use the brakes to bring the vehicle to a safe
stop. After the vehicle has stopped, turn the engine off and shift into P
(Park), then turn the key to the accessory or off position.
A. Off: The ignition is off.
B. Accessory: Allows some electrical accessories to operate while the
engine is not running.
C. On: All electrical circuits operational. Warning lamps and indicators
are illuminated. This is the key position when driving.
D. Start: Cranks the engine. The engine may continue cranking for up to
10 seconds or until the vehicle starts. Release the key as soon as the
engine starts.
KEYLESS STARTING (IF EQUIPPED)
WARNING: The keyless starting system may not function if the
key is close to metal objects or electronic devices such as mobile
phones.
Note: A valid key must be located inside the vehicle to switch the
ignition on and start the engine.
To turn the ignition on, press the start button once. It
is located on the instrument panel to the right of the
ENGINE
steering wheel. All electrical circuits and accessories
are operational, and warning lamps and indicators will
START
illuminate.
STOP
2013 Flex (471)
Owners Guide gf, 2nd Printing
USA (fus)
C
B
D
A
185