Tripp Lite BCINTERNET500 Owner's Manual page 6

Basic Operation
Indicator Lights
Other UPS Features
continued
continued
BATTERY CHARGE: This red light will turn ON continuously
after the UPS runs a self-test to indicate that the UPS's battery is
weakly charged. If it remains lit after you have allowed the UPS to
charge for twelve hours and run a second self-test, contact Tripp Lite
for service.
AC Receptacles: "UPS/Surge" receptacles provide your connected
equipment with AC line power during normal operation and battery
power during blackouts and brownouts. They also protect your
equipment against damaging surges and line noise. "Surge-only"
receptacles (identified on the back of the UPS) provide peripherals
with surge protection without committing precious battery power to
support them during blackouts.
Telephone/Network Protection Jacks: These jacks protect your
equipment against surges over a telephone line. Select UPS models
have RJ45 jacks, which can be used with network/data lines; see
Specifications to determine whether your model has RJ45 or RJ11
jacks. Connecting your equipment to these jacks is optional. Your
UPS will work properly without this connection.
USB Port (Select models only): The USB port connects your UPS to
any USB workstation or server. Using this port, your UPS can
communicate line-fail and low-battery status to your computer. Use
with Tripp Lite software and any USB cable to automatically save
open files and shut down equipment during a blackout. Contact Tripp
Lite Customer Support or consult your power protection software
manual for more information.
Battery Replacement Door: Under normal conditions, the original
battery in your UPS will last several years. Battery replacement
should be performed only by qualified service personnel. Refer to
"Battery Warnings" in the Safety section on page 2.
6 6