American Standard Savona Oval Whirlpool and Bathing Pool 2903.XXXW Installation Instructions

SAVONA OVAL™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
1073mm
(42-1/4)
537mm
(21-1/8)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
VALVES
95mm
(3-3/4)
102mm
305mm
(4)
(12)
51mm
(2)
540mm
(21-1/4 )
489mm
(19-1/4)
SAFE-T-HEATER
1-1/2 N.P.T.M.
REMOVABLE
THREADS
BLANK
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2903 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard,
tile, etc., water test the unit and check for leaks.
If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the
safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are
provided by others.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752878-100 Rev. E
2903.XXXW SERIES
WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

1524mm
(60)
241 mm
▲OUTLINE OF
(9-1/2)
CUTOUT - USE
TEMPLATE
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
PROVIDE ACCESS
ON/OFF SERVICING ON ALL
SWITCH
C/L OF
SHOWER ARM
C/L OF
SPOUT
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
60 x 42-1/4 x 21-1/4 In.(1524 x 1073 x 540mm)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
53 x 32 In. (1346 x 813mm)
15 In. (381mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
1.6 HP, 9.7 AMPS, 120V.

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped
to you after careful inspection. The whirlpool version is completely
assembled with pump, motor, and system piping. All you need to
finish the installation are your selected fittings and electrical
PUMP
connections for a whirlpool.
(MAY
EXTEND
To insure maximum performance and pleasure from this product,
BEYOND
please follow the instructions and cautions.
RIM BY 1-1/2")
TO PUMP FOR
INSTALLATIONS
List of Optional Components (not included):
• Safe-T-Heater 9075.120*
List of Required Components (not included):
• Drain 1583.470*
1651-1981mm
* see your American Standard Distributor
(65-78)
OPTIONAL
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
27.8
• Caulking Gun
45.4
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 15 amp GFI
• Cement, Plaster,
© American Standard Inc. 2005
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
Stringers
Outlet
Grout