Small Configuration; Stacking Cli Commands - Dell PowerConnect PC7024 Stacking Instructions

Stacking Dell PowerConnect 7000 Series Switches

Small Configuration


6 switches stacked

4 VLANs, all ports are members of all VLANs

2/2 static/dynamic lags with 8 members each

1 MSTP instance with VLANs

15 ACLs applied on 15 interfaces

5 Diffserv service interfaces with policies on 5 interfaces

2 VLAN routing interfaces

16 L2 Multicast group entries

256 ARP entries

16 Unicast routes
Parameter
L2 loss duration (non-failed or rerouted stack member)
L2 loss duration (failed/rerouted stack member)
L3 loss duration (failed/rerouted stack member)
IPMC loss duration (failed/rerouted stack member)
L2 convergence time
L3 convergence time
IPMC convergence time
Total convergence time

Stacking CLI Commands

The following stacking commands are available from the CLI. See the CLI Reference Guide for more
detailed information about the commands.
boot auto-copy-sw
clear checkpoint statistics
initiate failover
member
movemanagement
nsf
set description
show checkpoint statistics
show nsf
Timing
0 msec
10 msec
12 msec
12 msec
14.770 sec
14.800 sec
17.540 sec
17.540 sec
show stack-standby
show switch stack-ports
show switch stack-ports counters
show switch stack-ports diag
show supported switchtype
show switch
stack-port
switch renumber
Page 32