Fan Operation - Hitachi RAC-D10EX2 Instruction Manual

AIR PURIFIER OPERATION (FAN)

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit at the end
of summer.
FAN SPEED (AUTO)
For the heating operation
For the cooling operation
The air purifier is operated by pressing the
• The device beeps when it has received the signal and then the air purifier
starts.
• The OPERATION lamp on the indoor unit indicators turn on.
• The fan speed can be changed as desired.
1
Either HI, MED, LOW or SILENT can be selected.
The power of the air purifier is increased by increasing the speed of the air
conditioner's fan, by pressing the
COOL or DEHUMIDIFY operates.
(Depending on the operation conditions, there is a case that the fan speed does
not increase.)
Press the (START/STOP) button to stop operation.
STOP
Press the
CANCEL
(During HEAT, COOL or DEHUMIDIFY operation)
1
Press the FUNCTION selector so that the display indicates
Press the (FAN SPEED) button.
(HI) : The strongest air blow.
2
(MED) : Quiet.
(LOW) : More quiet.
(SILENT) : Silent
Press the (START/STOP) button.
START
Fan operation starts with a beep.
STOP
Press the button again to stop operation.
...When the AUTO fan speed mode is set in the cooling/heating operation:
• The fan speed will automatically change according to the temperature of discharged
air.
• As room temperature reaches the preset temperature, a very light breeze will blow.
• Operation starts in the "HI" mode to reach the preset temperature.
• As room temperature approaches the preset temperature, fan speed automatically
switches to "LOW".
(AIR PURIFIER) button while the HEAT,
(AIR PURIFIER) button again to cancel the air purifier operation.
– 17 –
(AIR PURIFIER) button.
(FAN).