Main Fuse - Hyundai ix35 Owner's Manual

3. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult a HYUNDAI
authorised repairer.
CAUTION
After checking the fuse box in the
engine compartment,
install the fuse box cover. If not,
electrical failures may occur from
water leaking in.
■ Type A
securely
■ Type B

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of the
same rating.
5. Reinstall in the reverse order of
removal.
OLM079052R
OEL070305R
Maintenance
7 45