Power Windows; Window Opening And Closing - Hyundai ix35 Owner's Manual

Installation maintenance specifications
Hide thumbs Also See for ix35:
Table of Contents

Advertisement

Features of your vehicle

Power windows

The ignition switch must be in the ON
position for power windows to operate.
Each door has a power window switch
that controls the door's window. The driv-
er has a power window lock switch which
can block the operation of rear (or front)
passenger windows.
The power windows can be operated for
approximately 30 seconds after the igni-
tion key is removed or turned to the ACC
or LOCK position. However, if the front
doors are opened, the power windows
cannot be operated even within the 30
seconds period. The driver's door has a
master power window switch that con-
trols all the windows in the vehicle.
4
20
✽ ✽ NOTICE
Whilst driving with the rear windows
down or with the sunroof (if equipped)
in an open (or partially open position),
your vehicle may demonstrate a wind
buffeting
or pulsation
noise is a normal occurrence and can be
reduced or eliminated by taking the fol-
lowing actions. If the noise occurs with
one or both of the rear windows down,
partially lower both front windows
approximately one inch. If you experi-
ence the noise with the sunroof open,
slightly reduce the size of the sunroof
opening.
noise. This

Window opening and closing

To open or close a window, press down
or pull up the front portion of the corre-
sponding switch to the first detent posi-
tion (5).
OLM049021R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents