Program Timer 8; Starting Reley; Option Switches - Splendide AS66VX Training Manual

C. PROGRAM TIMER
1. Remove the top cover as in (A).
2. Remove the 2 screws securing the
timer mounting plate to the control
panel and unclip the timer mounting plate
from the control panel.
3. Remove the 2 screws securing the timer
to the mounting plate.
4. Note the connections and disconnect the
wiring to the timer.
D. STARTING RELAY
1. Remove the top cover as in (A).
2. Cut the wire ties holding the relay to the
control panel.
3. Remove the 2 screws holding the relay to
the control panel (see right).
4. Disconnect the wiring to the start relay
noting the connections.
E. OPTION SWITCHES
1. Remove the switch caps by inserting a
small screwdriver into the slot and push-
ing out (see right).
2. Note the connections and disconnect the
wiring from the switch.
3. Depress the locking tabs to
remove the switch from the
control panel.
Dismantling Instructions
9