Door; Door Hinges; Front Bearings - Splendide AS66VX Training Manual

K. DOOR
1. Open the door and remove the 4 screws se-
curing the door assembly to the front panel.
2. Remove the door assembly from the front
panel.
3. Remove 1 screw securing the door latch to
the door (see bottom-left).
4. Remove the screw behind the door latch
which secures the door handle to the door
(see bottom-right).
5. Remove the 6 screws securing the 2 halves
of the door assembly.
6. The door trim can now be separated giving
access to the glass, handle and hinges.
L. DOOR HINGES
1. The door must be removed and split as
(L1)-(6) above.
2. Turn the door hinges inwards and slide the
hinge upwards to disengage from the rear
trim molding.
M. FRONT BEARINGS
1. Remove the front panel as in (G).
2. Spring the fi xing lug out of the open slot in
the
Bearing mounting bracket and slide the
pad along
The bracket to free the other lug as illus-
trated.
Dismantling Instructions
13