CompuSTAR FT-CHR Quick Start Card

Firstech Remote Start for
Chrysler | Dodge | Jeep
Thank you for purchasing Firstech Data Controller (DC) for Chrysler, Dodge, and Jeep vehicles. This Quick Start Card provides details on how to operate your
remote start system.
FT-CHR Data Controllers come with a 3 year / 36,000 mile warranty. Register online at www.compustar.com/warranty within 10 days of purchase. Check the place of
purchase as installation warranties may vary. Refer to DroneMobile or RF User Guides for additional details:
Start Using Factory Key Fob
To remote start using your factory key fob tap the 'Lock' button 3 times within 5 seconds. Your vehicle's parking lights will
flash once and start within 5 seconds. Once started the parking lights will flash once every 5 seconds. To shut down tap
'Lock' button 3 times within 5 seconds.
Start Using 1 Way RF Kit
To remote start using a 1 Way RF Kit hold the 'Key/Start' button for 2.5 seconds. Your vehicle's parking lights will flash once*
and start within 5 seconds. Once started the parking lights will flash once* every 5 seconds. To shut down hold the 'Key/
Start' button for 2.5 seconds. On 1 button remotes hold it for 3 seconds.
Start Using 2 Way RF Kit
To remote start using a 2 Way RF Kit hold button 2 or Key/Start button for 2.5 seconds. Your vehicle's parking lights will flash
once and start within 5 seconds. The remote will beep and confirm within 7 seconds. Once started the parking lights will
flash once every 5 seconds. To shut down hold button 2 for 2.5 seconds.
Remote Start Takeover
After remote starting your vehicle you may take over with your key. Begin by unlocking your doors with DroneMobile or
remote. Insert your key to the ignition and turn to the 'RUN' position. For vehicles with push to start or Keyless Enter-N-Go
make sure to have your key in the vehicle and press the 'START' button once. In either case the engine will remain running.
Note: If you press the foot brake or open the hood** while remote started, your vehicle will shut down.
* Parking light flash may require additional installation. Check with the installing dealer for details.
** Hood trigger input may require additional installation. Check with the installing dealer for details.
www.compustar.com
Quick Start Card