General Operations; Source Selection; Usb Terminal - Kenwood KDC-BT73DAB Instruction Manual

Basic operations

3-4. General operations

Power
Press [SRC] to turn the power ON.
Press and hold [SRC] to turn the power OFF.

Source selection

Press [SRC].
The source will switch each time upon pressing the
button.
Source
Standby
Digital radio[2]
Tuner
USB device connected to front USB terminal
USB device connected to rear USB terminal
iPod connected to front USB terminal[1]
iPod connected to rear USB terminal[1]
aha™ of iPod connected to front USB
[2][3]
aha™ of iPod connected to rear USB
[2][3]
aha™ of device connected via Bluetooth[1][2][3]
Bluetooth audio[2][3]
SD[1][4]
CD[1]
Auxiliary Input
[1] This source can be selected only when it can be played.
[2]
Function of KDC-BT73DAB.
[3]
Function of KDC-BT53U.
[4]
Function of KDC-5057SD.
Setting the source switching
• Source switching can be set so that pressing [SRC] switches
among sources. For more details, refer to
settings> (page 61).
• Source switching can be set so that "aha" and "AUX" sources
can not be selected when not in use. For more details, refer
to <12-7. Initial settings> (page
Volume
Turn [Control] knob.

USB terminal

A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) or KCA-iP102
(optional accessories) is recommended to
connect a USB device or iPod.
Auxiliary input
A portable audio device can be connected with
a stereo mini-plug (3.5 mm ø).
14
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
Display
"STANDBY"
"DIGITAL RADIO"
"TUNER"
"USB(FRONT)"
"USB(REAR)"
"iPod(FRONT)"
"iPod(REAR)"
terminal[1] "aha(FRONT)"
terminal[1] "aha(REAR)"
"aha"
"BT AUDIO"
"SD"
"CD"
"AUX"
<12-7. Initial
61).