Replay; Digital Radio Setting - Kenwood KDC-BT73DAB Instruction Manual

Listen to the Digital Radio (KDC-BT73DAB)

10-8. Replay

You can replay last about 7 minutes (audio bit rate:
128 kbps) of current service.
1
Press [R]
"Replay Mode" appears and enters the Replay
mode.
During Replay, you can perform the following
operations:
Operation type
Pause and play
Forward or backward 15 seconds Press [E] or [F].
Fast forward or Fast backward
Exiting from the Replay mode.
Press [R]
The on-air song is received.
50
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
Operation
Press and hold [1/6].
Press and hold [E] or [F].

10-9. Digital Radio setting

You can set the Digital Radio related items.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "Settings" using [Control] knob.
3
Select a Digital Radio setting item using
[Control] knob.
Display Description
"Seek Mode" Sets the Digital Radio seek mode.
Refer to
Radio> (page 46)
"DAB Priority" When this setting item is set to ON, the
station will automatically switch to a Radio
Data System Broadcast with the same radio
program in event the reception for Digital
Radio becomes poor.
In the same manner, the station will
automatically switch to a Digital Radio
Broadcast with the same radio program in
event the reception for Radio Data System
becomes poor. (If the same program is not
being broadcasted on either, it will not switch
between Digital Radio and Radio Data System).
"ON" / "OFF"
"DAB List Update" Sets updating method for "DAB List Update"
Service list information.
"ON": Automatically updates the service list
when ACC is turned ON.
"OFF": Updates the service list only when [R]
is pressed and held.
"PTY Watch" When a broadcast with program type set
to "PTY Watch" starts with the ensemble
currently being received, the reception for
broadcast automatically switches to that
program type.
Refer to
48)
"Watch
"TI" Switches to the traffic information
automatically when the traffic bulletin starts.
"ON" / "OFF"
"DAB Blend" Prevents audio break when switching from
Digital Radio to Analog Radio.
"ON" / "OFF"
text: Factory setting)
(Colored
4
Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
<10-1. Listening to the Digital
<10-6. PTY (Program Type)> (page
OFF" / program type (29 types)