Removing Expresscards - Fujitsu LIFEBOOK S752 User Manual

•
I
NSTALLING OR REMOVING AN
/
AND OR YOUR NOTEBOOK
•
D
O NOT INSERT AN
THE CARD
Y
OU MAY BE REQUIRED TO LOG ON AS AN
COMPUTER IS CONNECTED TO A NETWORK
See your ExpressCard manual for instructions on the installation of your card. Some cards may require that your
1
notebook is off while installing them.
Make sure there is no ExpressCard currently in the slot. If there is, see "Removing ExpressCards", below.
2
Insert the card into the slot with the label facing up.
3
Push the card firmly into the slot until it is seated in the connector.
4

Removing ExpressCards

See your ExpressCard manual for specific instructions on removing your card. Some cards may require that your
notebook be in Sleep Mode or Off during removal.
•
W
INDOWS HAS A SHUTDOWN PROCEDURE FOR
SYSTEM MANUAL FOR THE CORRECT PROCEDURE
SYSTEM TRAY
•
I
F THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED
AND SHUT DOWN YOUR NOTEBOOK
To remove an ExpressCard, push the eject button on the left of the ExpressCard slot so that it pops out. After the
button pops out, press it again to eject the ExpressCard. To remove the card, pull it straight out.
E C
XPRESS ARD DURING YOUR
.
E C
XPRESS ARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE
, LIFEBOOK ,
YOUR NOTEBOOK OR BOTH
A
DMINISTRATOR OR MEMBER OF THE
,
NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE
.
.
LIFEBOOK
NOTEBOOK
.
A
DMINISTRATOR
E C
XPRESS ARDS THAT MUST BE FOLLOWED BEFORE REMOVING A CARD
.) I
T IS GOOD PRACTICE TO REMOVE DEVICES USING THE
,
YOU MUST SAVE ALL OF YOUR OPEN FILES
71
'
S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD
' G
S ROUP TO COMPLETE THIS PROCEDURE
. (R
S R
AFELY EMOVE
,
CLOSE ANY OPEN APPLICATIONS
. I
F THE
.
EVIEW YOUR OPERATING
H
ARDWARE ICON IN THE