Fujitsu LIFEBOOK S752 User Manual page 39

•
Y
OU SHOULD NEVER LEAVE YOUR
ACCUMULATE INSIDE THE NOTEBOOK
•
B
E CAREFUL WHEN SEATING DEVICES IN THE BAY
MOVE EASILY IN THE BAY
Cold-swapping
To cold-swap modular devices in your Flexible Bay follow these easy steps:
Close any open files.
1
Shut down your LIFEBOOK notebook.
2
Pull out the Flexible Bay release latch. This will push your device out slightly, allowing you to remove it.
3
Slide your device out until it is clear of the bay. This will require light force.
4
Slide the device you are installing into your notebook until it clicks into place.
5
It is now safe to turn your notebook back on.
6
You can now access and use the device.
7
F B
LEXIBLE AY EMPTY WHEN THE NOTEBOOK IS IN OPERATION
.
. I
F THE FIT IS INCORRECT
, ,
REMOVE IT AND CHECK FOR DIRT OR FOREIGN OBJECTS
Flexible Bay Release Latch
Figure 11. Removing a Device from the Flexible Bay
,
YOU MAY DAMAGE THE BAY OR THE DEVICE
. I
T WILL REQUIRE A FIRM PUSH TO LATCH THE DEVICE IN PLACE
33
. I ,
F LEFT EMPTY DUST OR FOREIGN MATTER MAY
. I
F THE DEVICE DOES NOT
.