Cruising In Other Conditions - Yamaha 2C Owner's Manual

4. If equipped with the tilt support lever:
Slowly tilt the outboard motor down while
pulling the tilt support lever up.
5. Loosen the steering friction adjuster by
turning it counterclockwise, and adjust
the steering friction according to operator
preference. WARNING! If there is too
much resistance it could be difficult to
steer, which could result in an acci-
dent.
[EWM00721]
EMU28195

Cruising in other conditions

Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter.
Cruising in muddy, turbid, or acidic water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(see page 10) if you use the outboard motor in
acidic water or water with a lot of sediment in
it, such as muddy or turbid (cloudy) water. Af-
ter operating in such water, flush the cooling
passages with fresh water to prevent corro-
sion. Also rinse the outside of the outboard
motor with fresh water.
Operation
30