GE K0341 User Manual page 11

OPERATION
Keys
The key switches the loop
F2
F1
calibrator on and off. Press and hold
for 2 seconds.
MODE
The key changes the measure or
MODE
source operating mode. Pressing the
keys makes menu selections,
SPAN CHECK
sets numerical values and controls
step and ramp functions (up/down).
The select advanced
F1 F2
functions shown on the bottom of the display. When no key is
pressed for 10 minutes, the loop calibrator times out and
switches off. To disable this automatic time out, select
autpower down in the set-up menu.
5 K0341 Issue No. 2