Left Panel; Right Panel; Top - Silvercrest SKD 1000 A1 User Manual

Cassette Digitizer SilverCrest SKD 1000 A1
permitting a better understanding of the location of the different buttons and
sockets.

Left Panel

1 Socket for an optional mains adapter

Right Panel

2 Volume control: Turn the volume control knob to increase or lower the
volume.
3 USB port: The USB port is used to connect the USB cable to allow
connection of the device to a PC and copying of audio cassettes. We
recommend that you use a USB 2.0 port on your PC.
4 Earphone socket: For connecting the supplied earphones.
5 Release button for the cassette compartment cover. To open the cassette
compartment, slide this button in the direction of the arrow.

Top

6 DIR button: Press this button during playback or when playback has been
stopped to switch between playback of side A and side B of the cassette.
 /  button: Sliding this button to the  position ensures that the
7
playback stops when the end of the current side of the cassette is reached.
If you wish to continue the playback with the other side of the cassette when
the end of the current side is reached (continuous playback), slide this
button to the  position.
8 FF button: This is the Fast Forward button for advancing the cassette tape.
To stop the Fast Forward function, press the STOP button (11).
The STOP button (11) is also used to stop the Fast Forward function when
the end of the tape is reached.
9 REW button: Press this button to rewind the cassette tape. To stop the
Rewind function, press the STOP button (11).
The STOP button (11) is also used to stop the Rewind function when the
start of the tape is reached.
English 9