Table of Contents
Advertisement
If the unit is switched off and there is no
CD inserted in the drive,
➮
button 1.
press the
The release panel opens.
➮
Gently insert the CD with the
printed side uppermost into the
drive until you feel some
resistance.
The CD will be drawn automatically into
the drive.
You must not hinder or assist the drive
as it draws in the CD.
➮
Gently close the control panel
whilst exerting a little pressure until
you feel it clicks into place.
The unit switches on. CD playback
begins.
Note:
The unit will remain off if the
G
ignition is off. To turn it on, press
button 2 once.
The volume can be adjusted in steps
from 0 (mute) to 66 (maximum).
➮
To increase the volume, turn the
volume control 3 to the right.
➮
To decrease the volume, turn the
volume control 3 to the left.
You can set the unit's default power-on
volume.
➮
Press the MENU button 8.
➮
Keep pressing the fi or % button
7 until "ON VOLUME" appears in
the display.
➮
Set the power-on volume using the
@ and # buttons 7.
To help you adjusting the volume more
easily, the audible volume level will
increase or decrease accordingly as you
make your changes.
If you select "LAST VOL", the volume
played before the unit was last switched
off will be reactivated.
Note:
To protect your hearing, the
G
maximum switch-on volume under
the "LAST VOL" setting is "38". If
the volume was higher before the
unit was switched off and "LAST
VOL" has been selected, the
volume will be set at "38" the next
time the radio is switched on.
When you have finished making your
changes,
➮
press the MENU button 8 twice.
9
Hide quick links:
Advertisement
Table of Contents
