Table of Contents
Advertisement
"SENS HI" means that the tuner is highly
sensitive. "SENS LO" means it is set to
the lower sensitivity setting.
➮
Set the required sensitivity using
the @ or # buttons 7.
When you have finished making your
changes,
➮
press the MENU button 8.
Note:
Different seek tuning sensitivities
G
can be set separately for FM and
AM respectively.
You can also tune into stations manually.
➮
Press the @ or # button :.
➮
Select the required memory level
(FM1, FM2 or FMT) or the AM
frequency range.
➮
Tune into the station.
➮
Press one of the station buttons
1 - 6 9 for longer than 2 seconds
to store the station to that button.
You can automatically store six stations
with the strongest reception in the
region. The stations are stored in the
FMT or AM memory depending on the
selected frequency range.
12
Note:
Stations that were previously
G
stored in this memory are deleted
in the process.
➮
Press and hold the BND-TS button
4 until the seek tuning starts.
The station storing procedure begins.
"FM TSTORE" or "AM TSTORE"
appears in the display. After the process
is completed, the station that is stored
in location 1 of the respective memory
level will be played.
➮
Select the memory level on which
the station was stored.
➮
Press the preset station button
1 - 6 9 of the station you want to
listen to.
You can briefly play all the receivable
stations by activating the scan function.
You can set the scanning time to
between 5 and 30 seconds in the menu.
➮
Keep the MENU button 8 pressed
until the scan process starts.
"SCAN" appears briefly in the display
followed by the current frequency (which
flashes).
➮
Press the MENU button 8.
Scanning is stopped and the station that
was tuned into last will remain active.
Hide quick links:
Advertisement
Table of Contents
