Safety Regulations; General Safety Rules; Power Supply - Datalogic Falcon X3 User Manual

SAFETY REGULATIONS

Read this manual carefully before performing any type of
connection to the Falcon X3 mobile computer.
The user is responsible for any damages caused by incorrect
use of the equipment or by inobservance of the indication
NOTE
supplied in this manual.

GENERAL SAFETY RULES

−
Use only the components supplied by the manufacturer for the specific
Falcon X3 being used.
−
Do not attempt to disassemble the Falcon X3 mobile computer, as it does
not contain parts that can be repaired by the user. Any tampering will
invalidate the warranty.
−
When replacing the battery pack or at the end of the operative life of the
Falcon X3 mobile computer, disposal must be performed in compliance
with the laws in force.
−
Before using the devices and the battery packs, read par. 2.2.
−
Do not submerge the Falcon X3 in liquid products.
−
For further information, refer to this manual and to the Datalogic Mobile
web site: www.mobile.datalogic.com.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the Falcon X3 or else be supplied by a UL
Listed/CSA Certified Power Unit marked "Class 2" or LPS power source rated 5
V, 3.0 A, which supplies power directly to the Falcon X3 via the power
connector of the cable.
The package includes three international plug adapters. The adapters must be
plugged in the power supply before the power supply itself is plugged on the
wall outlet.
80