Advertisement
Reliable MF/HF Radiotelephone
for general and distress communications
with integrated DSC/DSC Watch Receiver
MF/HF radiotelephone with DSC facility
Fully meets GMDSS carriage requirements for SOLAS ships operating in A3 and A4 sea areas
Meets the new ITU recommendation on digital selective calling system for use in the Maritime
Mobile Service, ITU-R M.493-13
High-contrast 4.3" bright color LCD (480x272 pixels)
Capable of distress, safety and routine communication
Instant selection of 256 user-specified channels with a rotary knob or direct keypad input
Quick access to DSC message composition by dedicated keys on the control unit
Full-duplex kit available (optional supply for the FS-5075 only)
Quick access to dedicated functions in the menu operation using numeric keypad
Control Panel
Volume/Power knob :
1
RF GAIN knob :
2
PUSH TO ATT :
3
4
Press
5
PUSH TO ENTER knob :
6
MF/HF Radiotelephone
FS-2575
7
( 250 W )
FS-5075
( 500 W )
7
5
1
2
4
6
3
Sound volume control/Switching of Power ON/OFF
Adjustment of reception gain
Press to activate/deactivate RF attenuator
:
Long-press to transmit a DSC distress alert
:
Composition of DSC message for distress alert
:
Composition of DSC message except for distress alert and DROBOSE (DSC relay on behalf of someone else*)
+
:
Composition of DSC message for DROBOSE
:
Activation of the brilliance control dialog box
Activation of tab segment control on the screen
:
:
Opening/closing of the menu dialog box
Deactivates alarm/deletion of error and pop-up messages/halting of DSC message composition/exiting from the
:
message composition dialog box/distress cancellation/returning to a previous menu level
Switching the speaker ON/OFF
:
Shifts the selector and pointer/adjusts the degree of parameter, i.e., brilliance and switch over the display mode
Press to confirm the entered values
:
Switches to the DSC SCAN mode/if pressed during the DSC SCAN mode, routine scan will be halted
:
Sets to 2182 kHz SSB
Switches to radiotelephone mode, and if pressed in radiotelephone mode, channel setting box will be summoned
:
Used to enter the following number and symbols (. @ - _ / : 1) as well as quick access to short cut function
:
:
Used to enter A, B, C and 2, and to switch noise blanker setting ON/OFF
:
Used to enter D, E, F and 3, and to switch squelch setting ON/OFF
:
Used to enter G, H, I and 4 as well as quick access to short cut function
:
Used to enter J, K, L and 5, and to switch noise reduction setting ON/OFF
Used to enter M, N, O and 6
:
Used to enter P, Q, R, S and 7 as well as quick access to short cut function
:
:
Used to enter T, U, V and 8, and to switch notch filter ON/OFF
:
Used to enter W, X, Y, Z and 9
:
Used to reduce the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
Used to enter the number "0" , space and the following symbols (! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ - `{ } ~)/
:
to tune impedance between an antenna and a transceiver
:
Used to raise the receiver volume of the handset/to shift the pointer in channel/frequency selection dialog box
* composition and relay of the occurrence of a distress event obtained by non-DSC means
Simplified menu operation
Numbers are assigned for each of the menu items, and the operator
can access each of the menu items either by turning and pressing
PUSH TO ENTER knob to select menu items or simply pressing
number on the numeric keypad.
Press
Press
Press
Advertisement
