Part Names And Functions; Front Panel - Denon TU-1800DAB Operating Instructions Manual

Getting Started

Part names and functions

Front panel

• For details on the functions of these parts, refer to the pages given in parenthesis (
w
q
q
Power ON/STANDBY operation switch
The unit works 2 ~ 3 seconds after this switch is turned on.
Whenever the Power ON/STANDBY operation switch is
in the STANDBY state, the apparatus is still connected on
AC line voltage.
Please be sure to unplug the cord when you leave home
for, say, a vacation.
w
SECONDARY indicator
Indicates when a secondary service is available (
e
STEREO indicator
This lights when receiving stereo broadcasts. It remains
off when receiving FM monaural and AM broadcasts.
r
TUNED indicator
This lights when a station is properly tuned in.
t
RDS indicator
This lights when receiving RDS broadcasts, and flashes
during the RDS search.
y
ON/STANDBY indicator
This lights when the units status is on and stand by.
u
Remote control sensor
This sensor receives the infrared light transmitted from the
wireless remote control unit.
For remote control, point the wireless remote control unit
to the sensor.
Some of the functions can be operated with the remote
control unit (RC-1013).
i
Display
o
DIMMER button
The display's brightness switches (in three levels) each
time this button is pressed.
!0
MENU button
This button to enter/exit menu mode.
The unit times out if no operation is performed for about 5
seconds after the menu mode is set.
r y
u
e t
page 19).
i
o
!1
DISPLAY button
This button is used to select the display mode (
13, 16, 23).
!2
BAND button
Selects DAB, FM or MW (AM).
!3
AUTO TUNE button
Press to active auto location of all available DAB services.
Press once for UK service or hold for longer than 2
seconds to activate an inter national search.
!4
TUNING/PRESET knob
Each pass of this knob toggles the operation mode of the
TUNING / PRESET knob.
This knob is used in conjunction with the TUNING/PRESET
knob.
In the tuning mode the reception frequency is tuned up or
down. Turning the control in the clockwise direction tunes
the frequency up. Tuning the control in the counterclockwise
direction tunes the reception frequency down.
In the preset mode the selection of the preset channel is
moved up or down. The auto tuning operation cannot be
used when in this mode.
When writing station names, use this control to select the
letters ( page 17)
MEMO
• Whenever the Power ON/STANDBY operation switch is in
the STANDBY position, the unit is still connected on AC line
voltage.
Please be sure to unplug the cord when you leave home for,
say, a vacation.
• Noise may be generated if a near-by television set is on
during MW (AM), FM, DAB broadcasting reception. The tuner
should be used as far away from a television as possible.
• Effective period of memory back-up is about a month under
normal temperature.
6
page 10 ~ 24).
!4
!0 !2
!1 1 !3
page