Operation; Listening To Fm/Am; Fm Auto Preset Memory - Denon TU-1800DAB Operating Instructions Manual

Operation

Listening to FM/AM

POWER OFF
BAND

FM Auto preset memory

1
POWER/ON
Press the
power.
2
Watching the display, press the
to select the FM band.
3
AUTO PRESET/AUTO TUNE
Press the
4
ENTER
Press the
• The unit automatically begins searching for FM
broadcast stations.
When the first FM broadcast station is found, that
station is stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order
at preset channels A1 to A10, B1 to B10, C1 to C10, D1
to D10, E1 to E10, F1 to F10, G1 to G10, H1 to H10, I1
to I10 and J1 to J10 for a maximum of 100 stations.
Channel A1 is tuned in after the auto preset memory
operation is completed.
POWER ON
AUTO PRESET
/AUTO TUNE
ENTER
button to turn on the
BAND
button
button.
button.
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the manual "Preset memory"
operation.
• To interrupt this function, press the POWER OFF button.
• Does not operate with the AUTO TUNE button on the front
panel.
• Perform this operation from the remote control unit.
2 DEFAULT VALUE
Auto tuner presets
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 / 90.1 /
A1 ~ A10
90.1 / 90.1 / 90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 ~ B10
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C10 90.1 MHz
D1 ~ D10 90.1 MHz
E1 ~ E10 90.1 MHz
F1 ~ F10 90.1 MHz
G1 ~ G10 90.1 MHz
H1 ~ H10 90.1 MHz
I1 ~ I10 90.1 MHz
J1 ~ J10 90.1 MHz
10