Graco Husky 237-410 Instructions Manual page 4

EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result
in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
l Use the equipment only for its intended purpose. If you are in doubt about this, call your Grace
distributor.
Do not alter or modify this equipment. Use only genuine Grace parts and accessories.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the
100 psi (6.9 bar) maximum working pressure at 100 psi (6.9 bar) maxi-
mum incoming air pressure
ry used with it.
Do not move or lift pressurized equipment.
Use fluids or solvents that are compatible with equipment wetted parts.
section of all equipment manuals. Read the fluid and solvent manufacturer's warnings.
Fluid hoses must have spring guards on both ends to protect them from rupture caused by kinks
or bends at or close to the couplings.
Comply with all applicable local, state, and national fire, electrical, and other safety regulations.
TOXIC FLUID HAZARD
Improper handling of hazardous fluids or inhaling toxic fumes can cause extremely serious injury or
death from splashing in the eyes, ingestion, or bodily contamination.
Know the specific hazards of the fluid you are using.
l
Store hazardous fluid in an approved container. Dispose hazardous fluid according to all local,
l
state, and-national guidelines.
Wear appropriate clothing, gloves, eyewear, and respirator.
l
If the pump diaphragm fails, hazardous fluid may be exhausted along with the air. See your sepa-
l
rate pump manual for further information.
of the package or the maximum working pressure of any accesso-
the
See Technical Data
.
308-448 3