Thank you for purchasing the Clarion ARX6570z. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
CHANGES OR MODIFICATIONS NOT EX- The ARX6570z uses a flip-down structure that makes possible large-size displays. may cause harmful interference to radio com- PRESSLY APPROVED BY THE MANUFAC- 3.
Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. Be sure to close the HOLD FLAP for safety when removing the DCP. ARX6570z ARX6570z ARX6570z...
Random play. Switches between DOLBY NR Reduction mode. When pressed and TV and VTR. MONI held for 2 seconds: Disc random play. * Some of the corresponding buttons on the source unit and remote control unit have different functions. ARX6570z...
2. Each time you press FNC button 3, the mode tered a title, “NO-TITLE” appears in the title display instead. For information on how to en- of operation changes in the following order: ter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”. ARX6570z...
# several times until the function mode The factory default setting is “0”. (Adjustment is reached. range: –6 to +6) 3. When the adjustment is complete, press A-M button # several times until the function mode is reached. ARX6570z...
When the right side of SEARCH button $ is pressed, the station is sought in the direction of higher frequencies; if the left side of SEARCH button $ is pressed, the station is sought in the direction of lower frequencies. ARX6570z...
“ISR” appears in the display. Press ISR but- manual tuning or preset tuning. ton ! again to return to the previous mode. 2. Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station into preset memory. ARX6570z...
If you select another mode during FF/REW, it is selected with FF/REW continued. The mechanism automatically makes FF/REW stop when the end of the tape is reached. This function is called “monitor mode”. ARX6570z...
The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played. This function continues automatically until it is canceled. 1. Press SCN button 5 to start the intro tape scan. “SCN” lights in the display. ARX6570z...
5. Pressing ENT button 2 returns to the adjust- display and the cursor position flashes. ment selection display. 5. Press the right or left side of SEARCH button 6. Press ADJ button 4 to return to the previous $ to move the cursor. mode. ARX6570z...
“NO-TITLE” appears in the display. Scrolling a CD-text title When a CD-text title is longer than 11 charac- ters, you can scroll the display as follows. 1. Display the CD-text title (disc or track). 2. Press TITLE button 4. The title scrolls. ARX6570z...
1. Press RPT button 6. “RPT” lights in the dis- play and the current track is repeated. 2. To cancel the repeat play, press RPT button 6 again. “RPT” goes off from the display and normal play resumes. ARX6570z...
SCN button 5 again. “DISC” and “SCN” go 1. Press the right side of SEARCH button $ to off from the display and the current track con- move ahead to the beginning of the next track. tinues to play. ARX6570z...
2. To cancel the disc random play, press and hold RDM button 7 again. “DISC” and “RDM” go off from the display and normal play re- sumes from the current track. ARX6570z...
Page 17
Auto store selects 6 TV stations automatically and stores each one into a preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. ARX6570z...
Sound quality is Playback head is dirty. Use a cleaning tape, etc., to clean the head. poor. DOLBY NR button 7 is not When listening to a tape recorded with Dolby NR, press DOLBY NR button 7. pressed. ARX6570z...
Load a pre-recorded MD in the MD loaded in the MD changer. changer. If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. ARX6570z...
Signal to Noise Ratio, 70 s (CrO , FeCr, Metal) Dolby NR OFF: 58 dB Dolby B NR: 67 dB Notes: • Specifications comply with EIA Standards. • Specifications and design are subject to change without notice for further improvement. ARX6570z...