Controls; Nomenclature; Names Of Buttons; Display Items - Clarion ARX6570z Owner's Manual

3. CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente
With the FLIP DOWN PANEL opened / Ouverture du PANNEAU RABATTABLE
Apertura del PANEL ABATIBLE
Display / Afficheur / Visualizador
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
5
ARX6570z

4. NOMENCLATURE

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold).

Names of Buttons

1 OPEN button 8 Z-EHCR (z-enhancer) button
2 ENT (enter) button 9 Preset buttons (1 to 6)
Play/pause button
3 POWER button 0 DISP (display) button
! ISR (instant station recall) button
FNC (function) button
4 TITLE button @ BND (band) button
ADJ (adjust) button
5 SCN (scan) button # A-M (audio mode) button
PS/AS (preset scan/auto store) button
6 RPT (repeat) button $ SEARCH button
/
BLS (blank skip) button % Rotary knob
7 DOLBY NR button ¥ Cassette tape insertion slot
& Eject button
RDM (random) button

Display Items

1 Cassette tape in indication ! Long title indication
2 Dolby B NR indication
@ Operation status indication
3 LD (loudness) indication
4 A-M (audio mode) indication
# RDM (random) indication
5 Function mode indication
$ RPT (repeat) indication
The names of modes being selected, etc. are
% SCN (scan) indication
displayed.
6 MANU (manual) indication
¥ BLS (blank skip) indication
7 ST (stereo) indication & BAND indication
8 Z-EHCR (z-enhancer) indication * CD/MD changer mode indication
9 DISC indication ( TRACK indication
0 Preset channel indication (1 to 6)
Disc number indication (1 to 12)
The disc numbers corresponding to the discs
in the CD or MD changer light.
6
ARX6570z
The control panel can be detached to prevent theft. When detaching the control panel, store it in the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
1. Hold down POWER button 3 for 1 second or
Direct buttons (1 to 6) (7 to 12)
PROG (program) button
LOUD (loudness) button
2. Deeply push in OPEN button 1 to unlock the
3. Pull the DCP toward you and remove it.
The frequency, play time, clock, etc. are dis-
played.
4. Close the HOLD FLAP.
Be sure to close the HOLD FLAP for safety
when removing the DCP.
5. DCP
Attaching the DCP
1. Insert the right side of the DCP into the source
longer to turn off the power. unit.
2. Insert the left side of the DCP into the source
unit.
2.
FLIP DOWN PANEL.
If the FLIP DOWN PANEL does not open fully,
gently open it with your hand.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So close
the FLIP DOWN PANEL or remove the DCP
to store into the case.
DCP
• The connector connecting the source unit
and the DCP is an extremely important part.
Be careful not to damage it by pressing on
it with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
HOLD FLAP
CAUTION
1.
CAUTION
7
ARX6570z