Hardware Overview - Billion BiPAC 2073N Quick Start Manual

Hardware Overview

The LEDs and Buttons
The Ethernet Port and Reset Button
Billion BiPAC 2073N Wireless-N Homeplug AV 200 Wall Plug Ethernet Adapter
WLAN:
* Lit green when the wireless
* Blinking when data is
* Blinking quickly when WPS
Reset Button:
* Press the reset button more than 2 seconds
to reset device to factory default.
Ethernet Port:
* Connect your device (e.g.: computer, router,
hub/switch , IP pone, IPTV set-top-box,
gaming consoles...) to a Ethernet port, using
the included RJ-45 Ethernet cable.
-3-
function is enabled.
transmitted or received.
is proceeded.
POWER:
* Lit green when
power is ON.
PLC:
* Lit green when the power line
sync is established.
* Blinking when networking is
active.
ETH:
* Lit when connected to an
Ethernet device.
* Blinking when data is
transmitted or received via
Ethernet port.
WPS:
* Push the WPS button to
trigger the Wi-Fi Protected
Setup function.
SYNC:
* Power line sync