Do NOT use the BiPAC 2060G in high humidity or high temperatures Do NOT open or repair the case yourself. If the BiPAC 2060G is too hot, unplug the power immediately and have it repaired at a qualified service center.
Billion BiPAC 2060G Wireless-G Powerline Adapter The Front LEDs Meaning Blinking : Looking for Powerline Devices ACT: Fast Blinking : Transmit/receive data (Activity) No Network Traffic OFF: Blinking : Collisions Detected COL: (Collisions) OFF: No Collisions Detected Power : Lit when power is on.
Plug the BiPAC 2060G Powerline Access Point into an outlet Connecting a Wireless Device to the Access Point: If you are connecting to the BiPAC 2060G Access Point with a wireless/Homeplug device, all wireless configuration parameters must be configured to match.
Billion BiPAC 2060G Wireless-G Powerline Adapter Plan the installation of your Powerline network 1. Create a Powerline network using an Ethernet DSL/cable router. NOTE: You will need at least two powerline adapters to create a Powerline network.. BiPAC 2060G plugged into...
‧ There is a small hole on the right side of the device labeled RESET. ‧ With the end of a paper clip press the button inside the unit. The LEDs on the BiPAC 2060G will flash. Your device is now reset to factory default settings. - 7 -...
Billion BiPAC 2060G Wireless-G Powerline Adapter Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product.