Jump Button - Sirius Satellite Radio Starmate 4 User Manual

Jump Button

Your Starmate ST4 has a special preset button called the J
quickly tune to a channel that you want to access frequently, such as a traffic channel
or a sports channel. Pressing the J
programmed into the J
original channel. (Refer to Jump Settings, on page 103 for instructions for configuring
the J button.)
UMP
Traffic channel: If you have set the J
immediately begin a search for the traffic report of the specific city you have designated.
The Jump icon will be displayed in the lower right corner of the display screen to indicate
that a Jump search is active (see Figure 82).
The search process may take up to 4 minutes until the radio finds the city's traffic report.
Once the traffic report is found the ST4 will automatically tune to the traffic report
channel (see Figure 83).
Pressing the J
UMP
will cancel the search.
UMP
button; pressing the J
UMP
button again while the ST4 is actively searching for a traffic report
button 'jumps' to the specific channel you have
button again 'jumps' back to your
UMP
button to the T
UMP
Figure 82
Figure 83
button that lets you
UMP
option, pressing it will
RAFFIC
[
Operation
]
87