Plug-In Charging System - Toyota Prius Manual

Plug-in Charging System (2012 Model - Continued)
System Deactivation:
The following steps explain how to stop charging.
1. Disconnect the charge cable assembly connector from the vehicle.
To disconnect it, push the lock release button on the top of the
connector and pull it away from the vehicle.
2. Close the charge inlet door.
3. Disconnect the plug of the charge cable assembly from the
electrical outlet.
When the charging system is deactivated, high voltage cables are de-
energized and the high voltage electrical flow stops in the charge cable
assembly and vehicle.
WARNING:
The high voltage system, including the charging system, may remain
powered for up to 10 minutes after the vehicle is shut off, disabled, or
charging stops. To prevent serious injury or death from severe burns or
electric shock, avoid touching, cutting, or breaching any orange high
voltage power cable or high voltage component.
System Disabling:
To disable the charging system, disconnect the 12 Volt auxiliary battery
after performing the above deactivation procedure.
Disconnect Charge Cable Connector
Disconnect Plug
53
- -
Push
Close Charge Inlet Door
Remove Deck Board and Auxiliary
Box
12 Volt Auxiliary Battery
12 V Auxiliary Battery