Before guidance is started
Settings
Route options
In connection with entering a new itinerary in
the navigator: Select whether or not the system
should take into consideration traffic problems
when the
Start guidance
function is activated,
see page 49.
1. Set
Avoid traffic problems
2. Choose between
Yes
No
and
Yes
The system attempts as far as possible to
avoid roads with traffic problems when the itin-
erary is activated.
No
The system does not avoid any roads with traf-
fic problems when the itinerary is activated.
NOTE
When starting up the system it can take up
to 15 minutes before all traffic information
for the area has been loaded.
During the journey
Settings
Dynamic route guidance
The system proposes another route if there is
a suitable alternative, e.g. if a traffic message
states that there is a traffic problem on the
original itinerary.
.
Man/Sem-aut/Auto/Off
Choose how the system is to display an alter-
.
native route by selecting
Auto
, or shut down the function by selecting
Off
.
•
Manual
Another route is suggested, regardless of
whether it is better or worse - select/accept the
suggested route, then a new itinerary will be
used.
•
Semi-auto
Another route is suggested, but only if it is bet-
ter - select/accept the suggested route, then a
new itinerary will be used.
•
Auto
The system calculates and uses a new itinerary
automatically if a better route exists.
•
Off
Traffic information
Male
/
Sem-aut
/
04 Traffic information
Avoiding traffic problems
The system does not display or calculate alter-
natives for better routes.
Messages along the route
One of the
Male Sem-aut
alternatives is
selected in the preceding section and a traffic
problem arises along the route:
If there is another route past the problem, the
display shows the difference in distance and
driving time:
Changed traffic situation, New route?:
600 m longer, 00h 09m faster
(
Changed traffic situation. Use new route?:
600m longer, 00h 09m faster
).
•
Select
Yes
or
No
.
Yes (Yes)
A new route is used - around and past the
problem.
04
.
63