Tape; Traf (Traffic) - Toyota Avalon 2000 Operating Manual

Table of Contents

Advertisement

A type search in progress can be can-
celed by pushing the following buttons:
"SEEK", "TUNE", "SCAN", "AM", "FM", any
preset button, "CD" (if CD mode is avail-
able), "TAPE" (if tape mode is available),
"RDS",
"SRCH",
"<PROG
TYPES>",
"TRAF", or "LOAD". If any of these but-
tons is pressed, the search will be can-
celed and the appropriate function started.
Inserting a tape can also cancel the
search.
If no RDS stations are found, "FOUND 0
RDS" will display and the radio will return
to the previous FM mode and frequency.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. "ST" appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
'00 AVALON U (L/O9908)

TAPE

Push "TAPE" to switch from radio or com-
pact disc operation to cassette operation.
If the audio system is off, you can turn
on the cassette player by pushing "TAPE".
In both cases, a cassette must already be
loaded in the player.
TRACK (Track up/down button):
Compact disc player
By using this button, you can skip up or
down to a different track.
Push either side of the track button until
the number of the track you want to listen
to appears on the display. If you want to
return to the beginning of the current
track, push the down side of the button
one time, quickly.

TRAF (Traffic)

This button turns the traffic announcement
(TA) feature on and off. This button can
operate in RDS mode, or if the FM radio,
cassette player or compact disc player is
on.
By pushing this button, RDS is turned on
if it was off ("RDS" will display), and traf-
fic announcement feature is on. "TRAF"
appears on the display when the radio is
tuned to a traffic station. When the traffic
announcement feature is on, "< >" will be
displayed around "TRAF" ("<TRAF>").
If the current station is not a traffic sta-
tion, the radio will start a traffic program
search in increasing frequency order. Dur-
ing a traffic program search, "Seek Traffic"
will display. If no traffic programs are
found, "No Traf Info" will display.
If the radio receives a traffic announce-
ment, it will interrupt the cassette player
or compact disc mode (if either one was
on), adjust the volume to Traffic An-
nouncement level, and broadcast the traf-
fic announcement. During a traffic an-
nouncement, "Traf Announce" will appear
on the display. After traffic announcement,
it will return to the previous mode and
volume level.
TA volume memory function—The volume
when receiving the traffic announcement is
memorized.
When "TA" is received next time, the sys-
tem compares the volume before "TA" is
received and the memorized TA volume
and automatically selects the louder vol-
ume.
However,
the
range
of
memory is limited: if the volume received
previously is less than the minimum, this
volume will be the minimum range.
You can adjust the volume independently
from the memorized TA volume range
while receiving a TA station.
volume
191

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents