Table of Contents

Advertisement

"MODE" and "RESET/ADJ" buttons
These buttons are used to select the
item to be reset or adjusted.
Every time you push the "MODE" button,
the display toggles in the following order.
1. Hour
2. Minute
3. Year
4. Month
5. Day
6. English or metric unit selection of the
outside temperature gauge and cruise
information display
7. Compass deviation calibration (zone)
8. Compass circling calibration
When the item desired to be corrected
appears, reset or adjust it by pushing the
"RESET/ADJ" button.
"DISPLAY" button
This button is used to toggle the func-
tions of the cruise information display.
Every time you push the "DISPLAY" but-
ton, the display toggles.
For
more
details,
see
"—Cruise
information display".
136
'00 AVALON U (L/O 9908)
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.

—Clock

The digital clock indicates the time.
If the electrical power source has been
disconnected, the time display will auto-
matically be set to 1:00 a.m.
To reset the hour: Push the "MODE" but-
ton until the hour display appears and
blinks. Then push the "RESET/ADJ" but-
ton.
To reset the minutes: Push the "MODE"
button until the minute display appears
and blinks. Then push the "RESET/ADJ"
button.
After resetting the clock, push the "MODE"
button until the display returns to normal
calendar mode.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents