Toyota Avalon 2000 Operating Manual page 184

Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.
AUDIO CTRL / MODE (Audio control
and mode adjustment)
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For low- pitch tone adjustment,
"AUDIO CTRL / MODE" repeatedly until
"BASS" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from
"BASS -5" to "BASS 5".
184
'00 AVALON U (L/O 9908)
For middle- pitch tone adjustment, push
"AUDIO CTRL / MODE" repeatedly until
"MID" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from "MID
- 5" to "MID 5".
For high- pitch tone adjustment,
"AUDIO CTRL / MODE" repeatedly until
"TREB" appears on the display. Then turn
the knob to suit your preference.
The display will show the range from
"TREB -5" to "TREB 5".
Sound balance adjustment function—
This knob is also used to adjust the
sound balance between the front and rear,
and the right and left speakers.
For front/rear adjustment, push "AUDIO
CTRL / MODE" repeatedly until "FADE"
appears on the display. Then turn the
knob to adjust the front/rear balance.
push
The display will show the range from
"FADE FRONT 7" to "FADE REAR 7".
For left/right adjustment,
CTRL / MODE" repeatedly until "BAL" ap-
pears on the display. Then turn the knob
to adjust the left/right balance.
The display will show the range from "BAL
LEFT 7" to "BAL RIGHT 7".
CD (Compact Disc)
Push "CD" to switch from radio or cas-
sette operation to compact disc operation.
If the audio system is off, you can turn
on the compact disc player by pushing
"CD". In both cases, a disc must already
be loaded in the player.
push
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played.
If the player or another unit equipped with
the player malfunctions, your audio system
will display one of the six following error
messages.
If "WAIT" appears on the display, it indi-
cates that the inside of the player unit
may be too hot due to the very high ambi-
ent temperature. Remove the disc or mag-
azine from the player and allow the player
to cool down.
If "Err 1" appears on the display, it
indicates the disc is dirty, damaged, or it
push "AUDIO was inserted up- side down. Clean the
disc or insert it correctly.
If "Err 2" appears on the display, it
indicates no disc is loaded inside the
magazine. Insert a disc.