Tv Operation - Panasonic TH-32LRH50U Owner's Manual

TV operation

Connections (p. 8-10)
Other Useful Functions
Listen
with SAP
(Secondary
Audio
Program)
Closed
caption
Information
recall
Change
aspect
ratio
12
Turn the TV On with the POWER button
(TV)
or
or
Select a channel number
(Remote)
up
down
(TV)
Note
Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 29)
The channel number and volume level remain the same even after the TV is turned
off.
(Operate after
Select Audio mode for watching TV
Digital mode
Press SAP to select next audio track (if available) when receiving a digital channel.
Audio track 1 of 2
English (Main Audio)
Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
Switches the Closed caption mode On or Off
Closed caption Off
Displays or removes the channel banner
Channel
15-2
ABC-HD
Station
identifier
Press FORMAT to cycle through the aspect modes (p. 34)
(Remote)
or
)
English audio
Closed caption On Closed caption On mute
CC SAP
Closed SAP
caption indication
• 480i, 480p: FULL/JUST/4:3/ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
Input select: press (p. 13)
To directly enter the digital
channel number
When tuning to a digital channel,
press the button to enter the
minor number in a compound
channel number.
example: CH15-1:
Sleep timer
remaining time
30
TV-G 1080i 4:3
Rating Signal Aspect ratio
level resolution