Table of Contents
Advertisement
Data Copy from TV set to USB Memory
1.
Turn on the TV set.
2.
Insert USB Memory with a startup file (pwd file) to USB Terminal.
On-screen Display will be appeared according to the startup file automatically.
3.
Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2770
(b) For Hotel: 4850
Data will be copied from TV set to USB Memory.
It takes around 2 to 6 minutes maximum for copying.
4.
After the completion of copying to USB Memory, remove USB Memory from TV set.
5.
Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement: user_setup
(b) For Hotel: hotel
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Copy TV to Media
Please wait for a while
Please do not remove the Media
GETTING
Performing
Data Copy(Board replacement )
Data copy has been successful
Please remove Media
FINISH
Data copy
(Board replacement) or (Hotel)
Input Password
2770 or 4850
Performing
Completion
18
Advertisement
Table of Contents
