Toyota Tacoma 1998 Operating Manual page 28

Hide thumbs Also See for Tacoma 1998:
Table of Contents

Advertisement

CAUTION
"
After inserting the tab, make sure
the tab and buckle are locked and
that the belt is not twisted.
"
Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
"
If the seat belt does not function
normally, immediately contact your
Toyota dealer. Do not use the seat
until the seat belt is fixed. It cannot
protect an adult occupant or your
child from injury.
28
Too high
Adjust to a
snug fit
Keep as low on hips as possible
Remove excess length of the belt and
adjust the belt position.
To shorten the belt, pull the free end of
the belt.
Position the lap belt as low as possible
on your hips—not on your waist, then ad-
just it to a snug fit.
CAUTION
High-positioned and loose-fitting lap
belts could cause serious injuries due
to sliding under the lap belt during a
collision or other unintended result.
Keep the lap belt positioned as low
on hips as possible.
'98 Tacoma (U)
To release the belt, press the buckle-re-
lease button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents