Reinstalling Wheel Nuts - Toyota Tacoma 1998 Operating Manual

Hide thumbs Also See for Tacoma 1998:
Table of Contents

Advertisement

Before putting on wheels, remove any cor-
rosion on the mounting surfaces with a
wire brush or such. Installation of wheels
without good metal-to-metal contact at the
mounting surface can cause wheel nuts to
loosen and eventually cause a wheel to
come off while driving. Therefore after the
first 1600 km (1000 miles), check to see
that the wheel nuts are tight.

—Reinstalling wheel nuts

8. Reinstall all the wheel nuts finger
tight.
Reinstall the wheel nuts (tapered end in-
ward) and tighten them as much as you
can by hand. Press back on the tire back
and see if you can tighten them more.
'98 Tacoma (U)
—Lowering your vehicle
Two-wheel drive models
Four-wheel drive models
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents