Automatic Transmission - Toyota Sienna Operating Manual

Automatic transmission

Parking, engine starting
and key removal position
Reverse position
Neutral position
Normal driving position
Position for engine braking
Position for stronger
engine braking than
that in "2" position
With the brake pedal
depressed, shift while pulling
the selector lever toward you
(The ignition switch must be
in "ON" or "ACC" position.)
Shift while pulling
the selector lever
toward you
Shift normally
Vehicles with cruise control When the cruise control is being used, even if you downshift the transmission by turning off the overdrive
switch, engine braking will not be applied because the cruise control is not cancelled. For ways to decrease the vehicle speed, see
"Cruise control" in this chapter.
112
name. SIENNA (U)
Overdrive switch
For selecting either a three-speed
or four-speed transmission
"ON" position
(Shifting into overdrive
possible)
"OFF" position
(Shifting into overdrive
not possible)
"O/D OFF" indicator light
Shows the overdrive switch
is in "OFF" position