Toyota Land Cruiser 2000 Operating Manual page 205

When connecting a jack handle extension
with another extension and a jack handle
end, use a Phillips- head screwdriver or
jack handle to tighten the bolts on the
joints as shown in the illustration. When
connecting the jack handle with extension,
tighten the wing bolt on the jack handle
securely. Make sure the hollow meets the
bolt on any joint when you tighten the
bolts.
L/C 100_U
—Raising your vehicle
6. After making sure no one is in the
vehicle, raise it high enough so that
the spare tire can be installed.
Remember you will need more ground
clearance when putting on the spare tire
than when removing the flat tire.
To raise the vehicle, insert the jack handle
end into the joint of the jack (it is a loose
fit) and turn it clockwise with the handle,
making sure the handle remains firmly
fitted onto the jack handle end. As the
jack touches the vehicle and begins to lift,
double- check that it is properly positioned.
2000 L/C 100 (OM60866U)
CAUTION
Never get under the vehicle when the
vehicle is supported by the
alone.
jack
205