Toyota Land Cruiser 2000 Operating Manual page 139

Ventilation
For best results, set controls to:
Fan speed—"AUTO"
Temperature—To the desired
temperature
Air intake—FRESH (outside air)
Air flow—"AUTO"
Air conditioning—OFF
Turning the fan speed selector knob to
"AUTO" position turns on the air condition-
ing. At this time, the "A/C" button indicator
comes on regardless of whether or not the
"A/C" button is pressed in.
When the "A/C" button is not pressed in,
turning the fan speed selector knob to
"OFF" or pressing in the "A/C" button
turns off the air conditioning system.
L/C 100_U
Defogging
The inside of the windshield
For best results, set controls to:
Temperature—Towards high
temperature to heat;
low temperature to
cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
When turning the air flow control knob to
windshield position, the air intake selects
"Fresh" automatically. This is to clean up
the front view more quickly.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
D
On humid days, do not blow cold air
on the windshield—the difference be-
tween the outside and inside tempera-
tures could make the fogging worse.
2000 L/C 100 (OM60866U)
Defrosting
The outside of the windshield
For best results, set controls to:
Temperature—Towards high
temperature
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
When turning the air flow control knob to
windshield position, the air intake selects
"Fresh" automatically. This is to clean up
the front view more quickly.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
D
To heat the vehicle interior while de-
frosting the windshield,
floor/windshield air flow.
choose
139